Buy Stainless Steel Rolls & Bars To Brazil [Brazil] |
We are one trading company located in brazil who import and export in several sectors; when importing, we distribute locally; we are also currently dealing with the products listed below, however, we are looking to develop new suppliers in order to increase quantity and marketability; therefore kindly provide your rock bottom offer for the products listed below.
We will import, as a first trial from the new supplier, the quantities as shown below.
Therefore, kindly provide your best cif, santos port offer for the following products.
Kindly indicate the breakdown of the ocean freight price and the insurance price as well, for our local levy calculation.
I. ) product: Stainless steel coil rolls
Cold rolled: Astm or aisi 304; surface 2b
Hot rolled: Astm or aisi 304; surface no. # 01
Hardness: As per the standard (astm or aisi; hrb) or max.450 hv
A. ) thickness:1mm; 1.20mm; 1.50mm
Width:1200 or 1219mm
Specification: Thin cold (cold rolled)
B. ) thickness:1.90mm; 1/8
Width:1200 or 1219mm
Specification: Thin hot and thin cold (cold and hot rolled)
C. ) thickness:4.75mm; 6.30mm;
Width:1500mm
Specification: Thin hot (hot rolled)
Quantity to be imported:04 fcl as trial [total of 16 to 20 (sixteen) coils]
Packing: By the mill standard export packing.
Del. Allowance: +/- 10% on total weight and total amount.
Kindly indicate minimum order quantity because we want one coil of the each of the above as a trial order.
We understand that two coils weights approximately 03 thru 06 mt each; and each 20 ft container loads 04 to 06 coils; we cannot use 40 foot fcl because we are not permitted to transport higher than 26 mt weight fcl on our brazilian roads.
Photo of the coil, follows attached
Ii. ) product: Stainless steel round bar
Astm or aisi 304; mill polish (common)
Length: About 5 meters (it must fit in the container)
Diameters follows below
A. ) 3/16"
B. ) 1/4"
C. ) 5/16"
D. ) 3/8"
E. ) 7/16"
F. ) 1/2"
G. ) 9/16"
H. ) 5/8"
I. ) 11/16"
J. ) 3/4"
K. ) 7/8"
L. ) 1"
M. ) 1.1/4"
N. ) 1.3/8"
O. ) 1.5/8"
P. ) 1.3/4"
Q. ) 1.7/8"
R. ) 2"
S. ) 2.1/4"
T. ) 2.1/2"
U. ) 2.3/4"
V. ) 3"
Quantity to be imported:04 fcl as trial (mixed fcl)
Photo of the roll, follows attached
 |
|
 |
