Buy Glass bottles [HK] |
we are please to deal with your company
At present we are interesting with Glass bottles for veterinary vaccine attach please find the quantity and the specifications
I appreciate I you can send an offer for this inquiry
best regards
==
The book of specifications and the technical conditions for the veterinary vaccines bottles –rubber stopper- metal caps
Firstly A :Veterinary vaccine bottles- The quantity/1000 000/ one million small bottles :
1- The capacity of the bottle is from 11.5 to20 cm3
2- The weight of empty bottle is from 8.5 to 14 g
3- The glass is made from equivalent Borosilicate material
4- The color of glass is pure and transparent and impurity free
5- They can be sterilized in the temperature of dry air furnace
that can be reach until200 Co
6- They can resist the difference of temperature and sudden
coldness , because they will undergo coldness 70- Co and
follow that 20+ Co
7- The inner diameter of the bottle's opening 12.6 mm ±0.2,and
the external diameter of the bottle's opening 19,6 mm± 0.3
8- The bidder must mention the technical specifications of
offered glass and must enclose the special explaining
technical leaflets and the special catalogue for bottles.
9- The edges of the bottles must be round without protrusions.
10- Ten samples must be submitted at least.
B: The rubber stoppers for the veterinary vaccine bottles –
the quantity /1000 000/ one million small stoppers
1- They are made from brom potel material which is treated with
silicon
2- They must be free from appendages which prevent the tight
closure of bottles
3- These stoppers must contain side openings for evacuation
with a protrusion like the form of the bracelet which is
suitable for freeze dry vaccine
4- Their dimensions must be suitable for the inner diameter of
the bottle opening as mentioned in the enclosed diagram
5- The closure of the bottles with the required rubber stoppers
must be tightly to prevent the external air from entering
into the bottles after the closure
6- They must keep their rubber flexibility at the temperature
/70- Co/ and /20+ Co/ and the temperature of wet heat of the
autoclave 121+ Co.
7- All the cleavages of the stoppers must be consistent
8- Ten samples must be submitted at least.
C: The metal caps for the veterinary vaccine bottles – the
quantity /1500000/ One million and a half small size :
1- They are made from anti-corrosion hard aluminum
2- Their sizes must be suitable entirely with the rubber
stoppers and the presented vaccine bottles
3- They must be tight on the neck of the bottles when they are
pressed by the manual and automatic piston.
4- Ten samples must be submitted at least.
5- The weight of aluminum cap 0.38 - 0.43 g.
Remark
1- The bidder must present the three offers together (the
bottles, the rubber stoppers and metal caps) .
2- The winner must provide six manual pistons to close tightly
the required bottles.
Secondly A:
veterinary vaccine bottles - the QTY /500 000/bottles
1- The capacity of the bottle is 30 cm3.1±
2- The weight of empty bottle is from 20 to 27 g
3- The glass is made from equivalent Borosilicate material
4- The color of glass is pure and transparent and impurity free
5- They can be sterilized in the temperature of dry air furnace
that can be reach until200 Co
6- They can resist the difference of temperature and sudden
coldness , because they will undergo coldness 70- Co and
follow that 20+ Co
7- The inner diameter of the bottle's opening 12.6 mm ±0.2,and
the external diameter of the bottle's opening 19,6 mm± 0.3
8- The bidder must mention the technical specifications of
offered glass and must enclose the special explaining
technical leaflets and the special catalogue for bottles.
9- The edges of the bottles must round be without protrusions.
10- Ten samples must be submitted at least.
B: The rubber stoppers for the veterinary vaccine bottles –
the quantity /500000/ stoppers
1- They are made from brom potel material which is treated with
silicon
2- They must be free from appendages which prevent the tight
closure of bottles
3- Their dimensions must be suitable for the inner diameter of
the bottle opening as mentioned in the enclosed diagram
4- The closure of the bottles with the required rubber stoppers
must be tightly to prevent the external air from entering
into the bottles after the closure
5- They must keep their rubber flexibility at the temperature
/70- Co/ and /20+ Co/ and the temperature of wet heat of the
autoclave 121+ Co.
6- Ten samples must be submitted at least.
C :The metal caps for the veterinary vaccine bottles – the
quantity /750000/:
1- They are made from anti-corrosion hard aluminum
2- Their sizes must be suitable entirely with the rubber
stoppers and the presented vaccine bottles
3- They must be tight on the neck of the bottles when they are
pressed by the manual and automatic piston.
4- Ten samples must be submitted at least.
6- The weight of aluminum cap 0.38 - 0.43 g.
Remark
1- The bidder must present the three offers together ( the
bottles, the rubber stoppers and metal caps) .
Thirdly A: veterinary vaccine bottles- the qty/500000/bottles
1- The capacity of the bottle is 60 cm3.1±
2- The weight of empty bottle is from 30 to 38 g
3- The glass is made from equivalent Borosilicate material
4- The color of glass is pure and transparent and impurity free
5- They can be sterilized in the temperature of dry air furnace
that can be reach until 200 Co
6- They can resist the difference of temperature and sudden
coldness, because they will undergo coldness 70- Co and
follow that 20+ Co
7- The inner diameter of the bottle's opening 12.6 mm ±0.2,and
the external diameter of the bottle's opening 19,6 mm ± 0.3
8- The bidder must mention the technical specifications of
offered glass and must enclose the special explaining
technical leaflets and the special catalogue for bottles.
9- The edges of the bottles must be round without protrusions.
10- Ten samples must be submitted at least.
B: The rubber stoppers for the veterinary vaccine bottles –
the quantity /500000/ stoppers
1- They are made from brom potel material which is treated with
silicon
2- They must be free from appendages which prevent the tight
closure of bottles
3- Their dimensions must be suitable for the inner diameter of
the bottle opening as mentioned in the enclosed diagram
4- The closure of the bottles with the required rubber stoppers
must be tightly to prevent the external air from entering
into the bottles after the closure
5- They must keep their rubber flexibility at the temperature
/70- Co/ and /20+ Co/ and the temperature of wet heat of the
autoclave 121+ Co.
6- Ten samples must be submitted at least.
C :The metal caps for the veterinary vaccine bottles – the
quantity /750000/:
1- They are made from anti-corrosion hard aluminum
2- Their sizes must be suitable entirely with the rubber
stoppers and the presented vaccine bottles
3- They must be tight on the neck of the bottles when they are
pressed by the manual and automatic piston.
4- Ten samples must be submitted at least.
5- The weight of aluminum cap 0.38- 0.43 g.
Remark
1- The bidder must present the three offers together ( the bottles, the rubber stoppers and metal caps).
|
|
 |
