|
|
| 您现在的位置： 上海恩莱保贸易有限公司 > 供应信息> Endura® 500 |
|
|
|
|
| |
Coating Thickness
Our Series 500 coatings are applied utilizing a time controlled deposition process, which allows us to specify a wide range of thicknesses and hold tight tolerances. Depending on your application requirements, we routinely apply coatings as thin as 0.0002” per surface or as thick as 0.002” per surface, holding tolerancing within 0.0001” per surface. Our nominal thickness that we specify for the majority of our 500 Series coatings is 0.001”, which is held within +/- 0.0002” per side.
Surface Finish (RMS)
500 Series coatings are uniform and extremely conformal in nature. Unless you instruct Endura to grit blast prior to coating application, the majority of our 500 Series coatings will replicate your parts’ surface geometries and closely mirror their existing RMS surface values. If desired, 500 Series coatings are capable of being polished to a SPI A2 finish.
涂层厚度
我们的500系列涂层采用了时间控制沉积工艺，使我们能够指定广泛的厚度范围，并保持严格的公差。根据您的应用要求，我们通常会使用厚度为每面0.0002英寸或每面0.002英寸厚的涂层，每个表面保持公差不超过0.0001。我们为我们的500系列涂层的大部分指定的公称厚度是0.001“（在+/-中）0.0002”每边。
本产品网址：http://www.vooec.com/sjshow_474249525/
手机版网址：http://m.vooec.com/trade_474249525.html
产品名称：Endura® 500 |
|
|
|
|
|
