|
|
| 您现在的位置： 深圳市鑫台铭机械有限公司 > 供应信息> 切边机|切边机厂家|毛边切边机|油压切边机 |
|
|
|
切边机|切边机厂家|毛边切边机|油压切边机 详细说明 |
|
| |
切边机|切边机厂家|毛边切边机|油压切边机
切边机|切边机厂家|毛边切边机|油压切边机
适用范围：（各类铝、镁合金压铸制品毛边冲切、水口切边、金属制品整形、塑料制品的整切、切断，半切断：也适合于塑料的成型，板料的落料、拉伸、压印等以及塑料、粉末制品的压制等多种用途、汽车，机电、配件行业最广泛）
详细说明：
1.该系列液压机床以1-14MPA的液体压力为动力源,外接三相AC380V 50HZ或三相AC220 60HZ交流电源.总耗电功率不超过3.7KW.
2.该系列设备以液体作为介质来传递能量,效率高,冲切速度快,噪音小,
3.设备待机时噪音不超过80分贝.
4.采用四柱三板式结构,活动板的垂直精度由四个精密导套控制,下工作面与上工作面任意点的平行精度达到0.1MM以下.
5.冲床具有废料吹气装配.并在下工作台中央开有废料落料槽.
6.冲床的冲切下止点位置一般通过压力开关,位置感应器进行控制.
7.如客户的需要也可设计出快慢两段速度(一般快靠近产品时减速下压)
8.具有自动计数功能,分手动和半自动两种控制方式,手动可将压装上模停在任意行程范围内,配有紧急回升按钮,也可加装红外线护手装置。
9.压力、行程、冲切速度、吹气时间、闭合高度客户均可自行调整,方便操作；
10.液压系统内置油箱底部,外观整洁,稳重. 工作台下方装有脚轮和脚杯，可轻便移动.
11.该系列液压机械出力范围有3tf. 5tf. 10tf. 10tf 15tf. 可选.(1tf=1000kgf=9.8KN)
冲切机
亦可接受非标订做
切边机|切边机厂家|毛边切边机|油压切边机
切边机|切边机厂家|毛边切边机|油压切边机
Cutting machine for cutting machine manufacturers | | burr trimming | hydraulic cutting machine
Cutting machine for cutting machine manufacturers | | burr trimming | hydraulic cutting machine
Scope of application: ( all types of aluminum, magnesium alloy die casting products burr cutting, shaping, whole cutting of plastic products: suitable for plastic injection molding, sheet blanking, drawing, stamping and plastic products, powder pressing and other purposes, automotive, electrical, accessories industry's most extensive)
Detailed description.
In 1 the series hydraulic machine with 1-14MPA liquid pressure as the power source, external three-phase AC380V 50HZ or AC220 60HZ three-phase AC power supply. The total power consumption does not exceed 3.7KW.
The 2 series of equipment to liquid as the medium to transmit energy, high efficiency, fast punching speed, low noise,
3 equipment standby noise does not exceed 80 db.
Three 4 adopts four-column type structure, the movable plate vertical accuracy by four precision guided sets of control, under the working surface and the working surface of arbitrary point parallel precision achieves 0.1MM following.
5 punch having a waste air assembly. And in the table has a central waste discharging trough.
6 punch punching BDC position generally by a pressure switch, position sensor control.
7 if the customer needs can also design speed two speeds ( generally close to product deceleration under pressure )
8 with automatic counting function, manual and the semi-automatic two control modes, manual can be press-fit onto the mold to stop at any range of travel, equipped with emergency recovery button, can be equipped with infrared hand device.
9 pressure, stroke, punching speed, blowing time, customers can adjust the shut height, convenient operation;
The 10 hydraulic system built in the bottom of the tank, neat appearance, stable. The working platform is installed with castor and foot cup, can be easily moved.
The 11 series of hydraulic machinery power range for 3tf . 5tf . 10tf. 10tf 15tf. Optional. ( 1tF = 1000kgf = 9.8KN )
Punching machine
Can also accept non-standard custom-made
Cutting machine for cutting machine manufacturers | | burr trimming | hydraulic cutting machine
Cutting machine for cutting machine manufacturers | | burr trimming | hydraulic cutting machine
本产品网址：http://www.vooec.com/sjshow_4653460/
手机版网址：http://m.vooec.com/trade_4653460.html
产品名称：切边机|切边机厂家|毛边切边机|油压切边机 |
|
|
|
|
|
