|
|
| 您现在的位置： 河北鑫隆特种耐磨焊条厂 > 供应信息> YD518耐磨焊丝 |
|
|
|
|
| |
气体保护焊堆焊焊丝Gas ShieldedHardfacing Wires
牌号
Trade Name
直径
Diameter
HRC
（国家标准台式硬度计）
特点及主要用途
characteristicsandapplication
HB-YD114(Q)
1.6
50-55
(受强烈冲击后
After high impact)
高锰钢堆焊焊丝，受强烈冲击后，表面具有加工硬度的特点。
High-manganese steelhardfacing flux-cored wires, and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening.
HB-YD115(Q)
1.6
50-55
(受强烈冲击后After high impact)
用于受严重冲击高锰钢堆焊，加工硬化效果显著。
Applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening.
HB-YD165(Q)
1.6
60-65
高硬度耐磨焊丝，适用于磨粒磨损表面堆焊
High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding.
.
HB-YD258(Q)
1.6
55-60
用于耐磨表面堆焊
Applied to repair surface of wear parts.
HB-YD265(Q)
1.6
60-65
高硬度耐磨焊丝，适用于磨粒磨损表面堆焊
High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding.
HB-YD322(Q)
1.6
≥55
用于堆焊各种冲模及切削刃具，兼用于修复要求耐磨损性能较高之机械零件
Applied to repair surface ofhigh wear resistanceparts, such as die and cuttingcutlery.
HB-YD327A(Q)
1.6
≥55
专门用于模具堆焊，耐磨性能高于D322
Used tomouldsurfacing, wear resistance is better than D322.
HB-YD337(Q)
1.6
≥48
用于铸钢或锻钢上堆焊锻模
Applied to repairforging dieatcast steelorforging steel.
HB-YD397(Q)
1.6
≥40
用于堆焊铸钢或锻钢做坯体的热锻模或堆焊高强度耐磨件
Applied to repair hotforging dieatcast steelor forging steel, or highstrengthwear surfacing.
HB-YD405A(Q)
1.6
50-59
用于热轧辊开坯辊堆焊
Applied to repair hot-rolling blooming rollor.
HB-YD430A(Q)
1.6
20-35
打底层堆焊焊丝
A backing hardfacing flux-cored Wires
HB-YD488A(Q)
1.6
45-50
用于轧辊堆焊
Applied to repair rollor
HB-YD507Mo(Q)
1.6
35-45
用于510℃以下中高压阀门堆焊
Applied to valve which operating temperature is less than 510℃.
HB-YD518(Q)
1.6
40-50
用于连铸辊堆焊
Applied to repaircontinuous caster roller
HB-YD688(Q)
1.6
50-60
用于磨煤辊打底焊(韧性好，可以多层堆焊)
Used to coal roller backing welding.
surface of wear parts.
本产品网址：http://www.vooec.com/sjshow_432630438/
手机版网址：http://m.vooec.com/trade_432630438.html
产品名称：YD518耐磨焊丝 |
|
|
|
|
|
