|
|
| 您现在的位置： 上海塑美热流道（宁波）公司 > 供应信息> 上海热流道模具温控器 热流道模具温控箱 |
|
|
|
|
| |
塑美热流道温控器采用智能模糊控制技术及软启动功能，可确保塑料熔体的温度变化精确控制在±1℃范围之内。即使在热电偶已经损坏的情况下，将全自动模式变成手动模式，通过改变功率比控制模式加热，使模具得以继续生产。
Temperature controller of SM hot runner system applies intelligent fuzzy control technology and soft start, which can ensure to precisely control the temperature variation of plastic melt within ±1℃. Even when the thermocouple was damaged, it can turn the full automatic mode into manual mode to control the mode heating by changing power ratio, continuing the mould production.
特点
◆ 双排LED显示，操作简单
◆ 兼容YUDO、Athena、DME、PCS、INCOE等品牌的温控卡
◆ PID自动控制、手动控制、待机模式之间可自由切换
◆ 三种PID自整定方式可选择，控温精度高（常规/免过冲/上电启动）
◆ 二种感温线类型可选择（J/K）
◆ 二种温度单位可选择（℃/℉）
◆ 软启动模式和全速启动模式可选
◆ 操作菜单分级设置，高级参数使用功能锁保证安全
◆ 内置线性校准功能，可解决传感器位置不当或加热体
Characteristics:
◆ Double LED display and easy to operate.
◆ Compatible with YUDO, Athena, DME, PCS, INCOE and other bands’ temperate control cards
◆ Free switchover among PID automatic control, manual control, standby mode
◆ Three PID self-turning options with high temperature control accuracy(ordinary/ overshoot-free/ power-up )
◆ Two types of temperature line for options (J/K)
◆ Two temperature measures for options (℃/℉)
◆ Soft start and full start for options.
◆ Operation menu was set in levels and function lock can be applied to high-class parameters for safety guarantee.
◆ In-built with linear calibration function for solving improper senor position or heater
本产品网址：http://www.vooec.com/sjshow_4316062/
手机版网址：http://m.vooec.com/trade_4316062.html
产品名称：上海热流道模具温控器 热流道模具温控箱 |
|
|
|
|
|
