|
您现在的位置: 深圳市安品有机硅材料员有限公司 > 产品展厅 >
深圳安品硅胶 灌封胶905 产品,高导热,流动性能好
|
|
发布时间:
2024/9/18 17:07:00 |
|
|
|
电 话: |
86-0755-27334884 |
传 真: |
86-- |
手 机: |
15899754580 |
邮 编: |
|
地 址: |
深圳宝安福永 |
网 址: |
http://zhang15899754580.cn.vooec.com |
|
|
公司名称:深圳市安品有机硅材料员有限公司 |
联 系 人:张敏 女士 |
|
|
|
|
深圳安品硅胶 灌封胶905 产品,高导热,流动性能好 详细说明 |
|
|
深圳安品硅胶 灌封胶905 产品,高导热,流动性能好 Introduction of liquid double component silicone ------AP-905 Fearures: 1. Double component, excellent deep hardening performance, has certain adhesive force. It can get better bonding effect when using primary coat.        2. The adhesive will become elastomer after being dried, which has excellent cold and hot resistance performance, weather resistance and anti-ageing performance.        3. For all kinds of metals, most kinds of plastic (epoxy resin, PC, nitrile rubber, ternary ethylenepropylene rubber, ABS etc.) have certain adhesive force.It can have a good adhesive with the components.It has rather excellent sealed force.        4.Widely used to pressurization,waterproofing and anti-high voltage for electronic components, plugboard and other electronic appliances.        5. Typical purpose:        The sealing of LED screen, power module and all kinds of electronic products.
 Application technique:        a)  Measuring: Weigh A component and B component precisely.        b) Mixing: Put component B into container, which has component A, then mix adequately.        c) Deaerating: put the mixed liquid into the vacuum cabinet to deaerate.Generally,it is not necessary to take the air out if there is no foam .The deaerating time should be 5~10 minutes. (If there is no high demand of its electric capability, it is not necessary to be vacuum).        d)&# 本产品网址:http://www.vooec.com/cpshow_224154298/ 手机版网址:http://m.vooec.com/product_224154298.html 产品名称:深圳安品硅胶 灌封胶905 产品,高导热,流动性能好 |
|
|
|
|
|
深圳安品硅胶 灌封胶905 产品,高导热,流动性能好 |
|
|